Progress Eco S.A.

Producent sit przemysłowych

  1. PL
  2. EN
  3. DE
  4. ES
  5. PY

Newsletter


Metallurgy and coke engineering

Hutnictwo i Koksownictwo

Our screens, industrial filters, technological products and process solutions based on them can be widely used in metallurgy and coke engineering, being main elements of the following processes:

  • Coke screening
  • Copper ore classification
  • Feed water filtration
  • Lattice water filtration
  • Cooling water filtration
  • Lubricating water filtration
  • Service water filtration
  • Condensate filtration
  • Distillate filtration
  • Oil filtration
  • Ammonium sulphate filtration

To receive additional information concerning enhancing effectiveness and efficiency of technological processes carried out by Your company, please contact our specialists. We will be more than happy to prepare an individual offer for You.

Contact

 

Energetic resources PROGRESS
>> Download PDF

 

Industrial screens

  • Slot: from 0,05 mm
  • AISI (430, 304, 321, 316Ti, 317) Duplex A 669
  • Max. size: 3500 x 4000 mm
  • Standard working wire Sb type special wire Sbb type
see more
  • Tensioned screens and rubber mats
  • Square, rectangular, round mesh
  • Apertures: 4,0-200,0 mm
  • Material: Hard-wearing rubber strengthened with cord
see more
  • Apertures: 2,0 -90,0 mm
  • Square, rectangular, round mesh
  • Screen thickness: 5,0 – 60,0 mm
  • Hard-wearing rubber
  • Max. size: 325x430 mm
see more
  • Slot: 25,0-120,0 mm
  • Ø wire: 10,0-30,0 mm
  • Standard width: 630 mm
  • Material: abrasion-resistant steel, rubber
see more
  • Square and triangular mesh
  • Mesh: 1,2 -35,0 mm
  • Ø wire: 0,8 –6,3 mm
  • Polyurethane and rubber lacings
  • Max. width: 2000 mm
see more
  • One side flat screens
  • Mesh: from 10,0 mm
  • Ø wire: 2,5-12,0 mm
  • Max. width: 2500 mm
  • Delivered in sheets – screens sheets, reinforced sheets
see more
  • One- or multi- notch screens
  • Mesh: from 1,0 mm
  • Ø wire: max. 6,3 mm
  • Max. width: 4000 mm
  • Delivered in rolls or sheets
see more
  • Apertures: 1,6-160 mm
  • Square and longitudinal mesh
  • Thickness: 30-60 mm
  • Polyurethane type A and B (45-95˚Sh)
  • Max. 1900x2400 mm
see more
  • Apertures: 0,25 – 160,0 mm
  • Square and longitudinal mesh
  • Thickness: 30-60 mm
  • Polyurethane type A and B (45-95˚Sh)
  • Standard 300 x 1000 mm
  • Thermoplastic
see more
  • Slot: from 0,02 mm
  • Max. length: 6000 mm
  • Ø – min: 100 mm; max: 630 mm
  • Internal and external flow
see more
  • Simple and passed system
  • Round mesh round (cylindrical) , rectangular, square, hexagonal
  • Sheet thickness: 0,5 – 15,0 mm
  • Individual perforation
see more